Bookmark /  Discuss  /  Edit  this page or submit new.
x pins UNKNOWN connector layout
x pins UNKNOWN connector
for all Buell XB ecm
Pin Pin
Name		 Description
b1 +12v  
b2 Ground  
b3 Fuell pump  
b4 engine lamp  
b5 Injector front  
b6 Coil front  
b7 Coil rear  
b8 Injector rear  
b9 not connected for XB9, XB12 unknown
b10 Bank Angle Sensor  
b11 Ground for coil  
b12 Tachometer  
solo gray plug  
g1 +5 for sensors  
g2 TPS Throttle Position Sensor
g3 Camshaft position sensor  
g4 Oxygen sensor  
g5 +12 unswitched from battery
g6 Fan  
g7 Ground for sensors  
g8 Vehicle speed sensor  
g9 Engine Temperature Sensor  
g10 Intake Air Temperature sensor  
g11 Serial Recieve Data RX
g12 Serial Transmit Data TX

This is the schematics for the ECM as used on the Buell XB series

       gray                     black

 _/1  2  3  4  5  6\_        _/1  2  3  4  5  6\_
 
Is this document correct or incorrect?.
There are 0 reports in our database: 0 positive and 0 negative.
PinoutsGuide.com > Cars and bikes interfaces > Pinout of Buell ECM connector and layout of connector
This page contain parts under Copyright © 2000-2011 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.