Bookmark /  Discuss  /  Edit  this page or submit new.
16 pin J1962 OBD-2 car proprietary connector layout
16 pin J1962 OBD-2 car proprietary connector
at the Ford car
diagnostic interface for all moder Ford vehicles

 

Pin Signal Description
2 J1850 Bus+  
3 LS CAN Hi Low speed (125Kb) CAN bus. This bus used for some IC, RFA and other units.
4 CGND Chassis ground
5 SGND Signal ground
6 CAN High J-2284
7 K-LINE (ISO 9141-2 and ISO/DIS 14230-4)
10 J1850 Bus-  
11 LS CAN Low Low speed (125Kb) CAN bus. This bus used for some IC, RFA and other units.
14 CAN Low J-2284
15 ISO 9141-2 L-LINE (ISO 9141-2 and ISO/DIS 14230-4)
16 +12v Battery power

 

 

Interfaces used:

1996 - 2001 : J1850-PWM only

2002 - 2006 : J1850-PWM or CAN

after 2006    : CAN


 

Some OBD-II cables schemes:

OBD-2 ISO 9141-2 (14230-4, KWP2000) simple serial cable
OBD-2 J1850 PWM, J1850 VPW serial ELM327 cable
OBD-2 universal ISO 15765-4 CAN, SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 and SAE J1939 diagnostic cable

Is this document correct or incorrect?.
There are 1 reports in our database: 0 positive and 0 negative.
PinoutsGuide.com > Cars and bikes interfaces > Pinout of Ford OBD-II diagnostic interface
This page contain parts under Copyright © 2000-2011 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.