Hardware connector pinouts cables schematic wiring

Kia 20 pin diagnostic connector pinout

connector or cable wiring scheme

bookmark this page
20 pin Kia diagnostic custom connector layout
20 pin Kia diagnostic custom connector
at the KIA vehicle

used in all models manufactured in 1990-1996's and some later


 

Pin
Number		 Pin
Name		 Description (may be empty)
1 +12V  Power, after fuel pump
2    Cooling fan signal
3    Engine rotation speed / ignition signal
4 GND  Ground
5 +12V  +12V power
7    initial ignition management (coil 2)
8 L-Line  ABS diagnostic
9 K-Line  Engine diagnostic
10    Automatic transmission failure code
11    Check Engine indicator. Self-diagnostic codes output.
12 GND Ground
14 K-Line Airbag diagnostic
15 K-Line ABS diagnostic codes
16    initial ignition management (coil 1)
17 K-Line Cruise-control
18 L-Line Automatic transmission diagnostic
19 L-Line Engine diagnostic
20   Engine monitor output

 


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
Pinoutsguide.com > Cars and bikes interfaces > Pinout of Kia 20 pin diagnostic connector
Is it correct?:
unknown
no reports
Last updated 2009-08-21 23:41:41. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2009 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.