OBD-2 ISO 9141-2 (14230-4, KWP2000) simple RS-232 cable schematic pinout

connector or cable wiring scheme

9 pin D-SUB female connector	Components: R1,2,6,7,9,10 - 560 ohm, 0.25W R3,4,5,8 - 4K7 OHM, 0.125w T1 - BC556 or 2N3906 T2,T3 - BC546 or 2N3904 One of our users reports that from collector of t1, r4 has to go to GND. Want to add or correct something here? Edit this page!	16 pin J1962 OBD-2 car custom connector

Pinoutsguide.com > Cars and bikes interfaces > Pinout of OBD-2 ISO 9141-2 (14230-4, KWP2000) simple RS-232 cable schematic and layout of 9 pin D-SUB female connector and 16 pin car OBD2 special connector	Is it correct?:	unknown
Source(s) of this and additional information: hem.passagen.se/tomasf/obd2/ Contributor: Steve Gray	4 reports
Last updated 2009-08-29 17:06:20. Edit this page.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2009 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.