16 pin J1962 OBD-2 car proprietary of Opel OBD II diagnostic interface connector layout
16 pin J1962 OBD-2 car proprietary connector
at the opel car
Opel vehicle function
1   n/a
2 J1850 n/a
3    K-Line, K2, TCM, Sunroof, CDL, Multi-Timer
4 GND  Chassis ground
5 SGND  Signal Ground
6 HS-CAN  Blinkcode
7 K-Line K-Line, K1 (engine)
8   K-Line, K4
9   reserved
10  PWM n/c
11   reserved
12   K-Line, K3, ABS, TC, Steering, RTD, OW
13   reserved, K-Line, K5
14  HS-CAN(-) reserved
15 L-Line  n/c
16  Battery+ Battery +, unswitched

Some OBD-II cables schemes:

OBD-2 ISO 9141-2 (14230-4, KWP2000) simple serial cable
OBD-2 J1850 PWM, J1850 VPW serial ELM327 cable
OBD-2 universal ISO 15765-4 CAN, SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 and SAE J1939 diagnostic cable
Is this document correct or incorrect?.
There are 1 reports in our database: 0 positive and 1 negative.
PinoutsGuide.com > Cars and bikes interfaces > Pinout of Opel OBD II diagnostic interface
This page contain parts under Copyright © 2000-2014 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.