Hardware connector pinouts cables schematic wiring

Peugeot OBD II diagnostic connector pinout

connector or cable wiring scheme

bookmark this page
16 pin J1962 OBD-2 car custom connector layout
16 pin J1962 OBD-2 car custom connector
at the Peugeot car

for all 1997 and later Peugeot models

Pin
Number		 Pin
Name		 Description (may be empty)
2 K-Line  Heater and air-conditioner diagnostic
3    engine rotation sense
4 GND  Chassis ground
5 SGND  Signal ground
6 CAN-high  J-2284
7 K-Line  Engine and transmission diagnostic
10 K-Line  Steering wheel module diagnostic
11 K-Line  anti-thieft module, tire pressure module, some other modules (for Peugeot 307,607,807) diagnostic
12 K-Line  ABS diagnostic
13 K-Line  Airbag dignostic
14 K-Line  lock diagnostic
14 CAN-low  J-2284
15 L-Line  Engine and transmission
16 +12V  Accumulator

Some OBD-II cables schemes:

OBD-2 ISO 9141-2 (14230-4, KWP2000) simple serial cable
OBD-2 J1850 PWM, J1850 VPW serial ELM327 cable
OBD-2 universal ISO 15765-4 CAN, SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 and SAE J1939 diagnostic cable

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
Pinoutsguide.com > Cars and bikes interfaces > Pinout of Peugeot OBD II diagnostic connector
Is it correct?:
unknown
no reports
Last updated 2009-10-27 23:13:06. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2009 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.