Hardware connector pinouts cables schematic wiring

Saab OBD II diagnostic interface pinout

connector or cable wiring scheme

bookmark this page

Pin
Number
Pin
Name
Saab vehicle function
1    Saab Instruments (+)
2 J1850 n/a
3   n/a
4 GND  Chassis ground
5 SGND  Signal Ground
6 HS-CAN Blinkcode
7 K-Line K-Line, K1 (engine)
8   K-Line (Saab 9000/1, KW81/82 protocols)
9   Saab Instruments (-)
10  PWM n/a
11   L-Line Memory Seats
12   n/a
13   n/a
14  HS-CAN(-) n/a
15 L-Line n/a
16  Battery+ Battery +, unswitched

Some OBD-II cables schemes:

OBD-2 ISO 9141-2 (14230-4, KWP2000) simple serial cable
OBD-2 J1850 PWM, J1850 VPW serial ELM327 cable
OBD-2 universal ISO 15765-4 CAN, SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 and SAE J1939 diagnostic cable

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
Pinoutsguide.com > Cars and bikes interfaces > Pinout of Saab OBD II diagnostic interface
Is it correct?:
unknown
no reports
Last updated 2009-10-27 23:13:58. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2009 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.