should charge most phones and other devices equipped with micro-USB connector

 

USB Pin
Number
Description Micro-USB Pin
Number
1 VCC +5V, up to 500 mA by USB 2.0 standard 1
2 tied together or connected via resistor. In order to device may recognize charger 
this lines should be tied together via resistor 0-200 Ohm
2
3 3
4 GND 5

Original (genuine) chargers are:

  • Motorola P333
  • HTC TC E250
  • Nokia AC-6
  • Samsung ATADU10
  • Sony Ericsson EP310
  • Sony EP851
  • LG STA-53RS
  • BlackBerry microUSB ASY-18080-001
4 pin USB A plug connector layout
4 pin USB A plug connector
at the PC side of cable
5 pin Micro USB A, Micro USB B plug connector layout
5 pin Micro USB A, Micro USB B plug connector
at the cable
According to 4 reports in our database (3 positive and 0 negative) this pinout should be correct.

Is this pinout
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.