Hardware connector pinouts cables schematic wiring

UPS Neuhaus SmartLine-420, SmartLine-750 pinout

connector wiring scheme

bookmark this page

Cable Part M2502

 

Device 1
Pin Number
Device 1
Pin Name
Direction Device 2
Pin Number
Device 2
Pin Name
Description (may be empty)
6 Rx   3 TxD  Rx (RS232) and Turn Off UPS (Contact Closure)
7 Common   5 GND  Common
9 Tx   2 RxD  Tx (RS232)

 
    7,6,1 RTS,DSR,DCD  connect

 
    8,4 CTS,DTR  connect

 

 
 
 
   
2
 
         AC Failure (Contact Closure)
4
 
     
 
 Common
5
 
     
 
 Battery Low (Contact Closure)

 


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
Pinoutsguide.com > Some peripheral devices pinouts > Pinout of UPS Neuhaus SmartLine-420, SmartLine-750
Is it correct?:
unknown
Contributor: SS_
no reports
Last updated 2010-01-06 22:59:43. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2009 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.