Bookmark /  Discuss  /  Edit  this page or submit new.
3 pin N3 Canon plug connector layout
3 pin N3 Canon plug connector
at the Canon cable
with N3 connector. The connector may be obtained from wired remote control

 

Pin
Number		 Pin
Name		 Description
3 GND Ground
2 FOCUS short to pin 3 to focus Canon camera
1 SHUTTER short to pin 3 to trigger shutter 

If the camera is in stand-by mode, there is a 3.3V voltage present at the focus wire. The camera can be waken up from stand-by by connecting the focus wire to ground. The trigger inputs can serve as power supply for circuits with a supply current of less than 30µA.

Is this document correct or incorrect?.
There are 0 reports in our database: 0 positive and 0 negative.
PinoutsGuide.com > Digital cameras and camcorders interfaces > Pinout of Canon EOS 10D, 20D, 30D, 40D, 50D, 5D, 5Dmk2, 7D manual shooter / focus connector
This page contain parts under Copyright © 2000-2011 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.