Hardware connector pinouts cables schematic wiring

Heidenhain TNC 425 LCD connection pinout

serial interfaces pinouts

bookmark this page
x pins UNKNOWN connector layout
x pins UNKNOWN connector
at the x43 VDU (BC 110)Heidenhain

used to connect LCD monitor to Heidenhain TNC 425 at the pole X43 in replacement of old Screen VDU (BC 110)

Pin
Number
Pin
Name
Description (may be empty)
1 n/c  
2 n/c  
3 n/c  
4 n/c  
5 n/c  
6 n/c  
7 R  read
8 n/c  
9    V sync yellow
10    H sync  pink
11    GND  Black
12 n/c  
13 n/c  
14 G  green
15 B  Blue

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
Pinoutsguide.com > Various Electronic Devices > Pinout of Heidenhain TNC 425 LCD connection
Is it correct?:
unknown
Contributor: Yves Giard
no reports
Last updated 2010-02-23 22:40:38. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2009 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.