Bookmark /  Discuss  /  Edit  this page or submit new.
6 pin MOLEX 39-01-2060 connector layout
6 pin MOLEX 39-01-2060 connector

 

Pin
Number		 Pin
Name		 Description (may be empty)
1 ?  
2 ?  
3 Gnd 0V
4 +5V Supply via resistor
5 Rx Data to PLC rs232 TTL
6 Tx  From PLC to PC TTL 232

Because I can't find good picture of socket, you need to rotate your PLC counter-clockwise - then numbers of pins will be OK.

Rx pin is pull-up'ed to +5V

For conecting to PC you need simply converter on MAX-232, only rx,tx are used.

After powering up PLC, Rx pin is Low about 3 seconds (lcd of plc is blank) , after that - is pull-up'ed.

Model easy 619 from moeller, works (comunicate) with free Allen Bradley PicoSoft :)

Is this document correct or incorrect?.
There are 0 reports in our database: 0 positive and 0 negative.
PinoutsGuide.com > Various Electronic Devices > Pinout of Easy MOELLER PLC, Allen Bradley Pico
This page contain parts under Copyright © 2000-2011 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.