VModa headphones/earbuds/headset (Vibrato Remote, probably other models), with iPhone functions
If you know description of Do-It-Yourself device made using this pinout, share the link with us.


1 tip (L) Red Striped
2 ring1(R) Green
3 ring2 (Ground) Blue, Blue Striped, Copper
4 sleeve (Mic) Red

VModa Vibrato Remote earphones/earbuds:
Tip (Left channel) - Red Striped (striped meaning red and bare copper)
Ring 1 (Right channel) - Green
Ring 2 (Ground, common) - Blue AND Blue Striped AND Bare Copper
Sleeve (Microphone) - Red
This preserves all iPhone functions (vol, stop/start, etc.)

Is this document correct or incorrect?.
There are 0 reports in our database: 0 positive and 0 negative.
4 pin 3.5mm (2.5mm) plug connector layout
4 pin 3.5mm (2.5mm) plug connector
Source(s) of this and additional information: None -- developed and verified thru experimentation (with successful soldering)
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.