If you know description of Do-It-Yourself device made using this pinout, share the link with us.


1 LED+  Grey 
2 IN R


3 OUT R  Red
4 OUT L  Black
5 GND (signal)  Green & Shield wire
6 ON  Connect to pin 7
7 +5V  
8 GND (amp)  Yellow & Blue
9 IN L  Purple




If the switch does not work, try to change connection between pin 7 and 1. The amplifier should turn on when there is +5V at pin 6.

Subwoofer amplifier is turned on with the sattelites, there is no separate circuit for turning the subwoofer on.


Hope this will help. Have fun and don't fry something. ^ ^

Is this document correct or incorrect?.
There are 11 reports in our database: 10 positive and 0 negative.
9 pin D-SUB female connector layout
9 pin D-SUB female connector
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.