UPS devices  > APC pinouts
APC Part# 940-0024C, # 940-0024B, # 940-0024D or 940-1524(black cable). Compatible with most APC UPSs that have a DB9 serial port. Should work with APC PowerChute or Apcupsd(UPS Server for Linux)

Should be compatible with: 

  • Back-UPS Pro    BP650, BP650S, BP650SC, BP420, BP420S, BP420SC, BP280S (also compatible with  940-0095B cable)
  • Smart-UPS 3G    SU420NET, SU620NET, SU700NET, SU1000NET, SU1400NET, SU2200NET, SU3000NET, SU2200XLNET, SU2200XLTNET, SU3000TNET, SU5000T, SU1400RMXL3U, SU2200RM3U, SU2200RMXL3U, SU2200RMXLNET, SU2200RMXLTNET, SU3000RM3U, SU3000RMNET, SU3000RMT3U, SU3000RMXL3U, SU5000, SU5000RMT5U
  • Smart-UPS 3.5G    SU700RM2U, SU1000RM2U, SU1400RM2U
  • Smart-UPS 3.6G(Serial)    SUA1000, SUA1500, SUA750XL, SUA1000XL
  • Smart-UPS 4.0G(Serial)    SUA2200, SUA2200RM2U, SUA3000, SUA3000RM2U, SUA3000RMT2U
  • Smart-UPS SC    SC420, SC620
  • Matrix    MX3000, MX5000, MX3000XR, MX5000XR

 

APC Part# 940-0024A, 940-0024B, 940-0024C, 940-0024D, 940-1524  cable scheme

According to APC forum, letter suffix is related to (change of?) manufacturer or revision, not wiring, and cables are electrically interchangable.

'Simple scheme' diagram further below looks correct for 940-0024 & A,B,C or D revisions and 940-1524 which is 15' long cable; and matches what viewed on a third-party site. 

 

Simple scheme

UPS
Signal Name
DB-9 Male
(UPS end)
DB-9 Female
(PC end)
PC
Signal Name
TX / AC Fail 2 2 Rx, Received Data
RX / Shutdown 1 3 Tx, Transmitted Data
Common 9 5 GND

At the PC end: pins 1,4 (DCD, DTR) shorted; pins 7,8 (RTS, CTS) shorted.
DB-9 shells are also connected.


 

Alternative scheme. Smart UPS Console Cable  APC part # is unknown.

DB 9 PC Male
UPS DB 9 Female
Comment
1 & 2
2
RX??  Short Pins 1 & 2 on PC side connect to Pin 2 on UPS side
3
1
TX ??
4
N/C
No Connection
5
9
GND
6
N/C
No Connection
7 & 8
N/C
Short Pin 7 & 8 on PC side.

Terminal Set Up:

2400 baud 8 bit no parity 1 stop no handshake.

Apply the port settings to establish the connection.
 Press <Enter> 3-5 times to display the username prompt.
Use the default username and password of apc

 

9 pin D-SUB male connector layout
9 pin D-SUB male connector
at the UPS
9 pin D-SUB female connector layout
9 pin D-SUB female connector
at the PC
According to 52 reports in our database (50 positive and 2 negative) this pinout should be correct.

Is this pinout
APC Smart UPS DB9 cable visual pinout:
APC Smart UPS DB9 cable diagram
click to enlarge
Source(s) of this and additional information: UPS FAQ in russian, http://aplawrence.com/Bofcusm/472.html
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.