| Pin | Signal | Description |
| 2 | J1850 Bus+ | |
| 4 | CGND | Chassis ground |
| 5 | SGND | Signal ground |
| 6 | CAN High | J-2284 |
| 7 | K-LINE | (ISO 9141-2 and ISO/DIS 14230-4) |
| 10 | J1850 Bus- | |
| 13 | TC | Timing check - ignition advance angle adjustment or ABS slow codes out |
| 14 | CAN Low | J-2284 |
| 15 | ISO 9141-2 L-LINE | (ISO 9141-2 and ISO/DIS 14230-4) |
| 16 | +12v | Battery power |
Protocols in use:
1996: J1850-VPW
1997-1999: J1850-VPW or ISO 9141
1999-2003: ISO 9141
2004-2006: ISO 9141 or CAN
2007 and later: TBD
Some OBD-II cables schemes:
OBD-2 ISO 9141-2 (14230-4, KWP2000) simple serial cable
OBD-2 J1850 PWM, J1850 VPW serial ELM327 cable
OBD-2 universal ISO 15765-4 CAN, SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 and SAE J1939 diagnostic cable