Bookmark /  Discuss  /  Edit  this page or submit new.
5 pin IDC male connector layout
5 pin IDC male connector
at the Mainboard
Proprietary 5 pin Fan connector

This is the Case Fan Pinout for the Proliant ML310 Generation 1, may be compatible to other Proliant Servers and ML310 Generations.

Uses non-standard 5-Pin-Fan-Connector, possibly to lock out cheap 3rd party fans.

The only special lines are the "Status"-Line and the 5th Pin. For normal operation, Status (Pin 2) is tied to Pin 1 (GND). An Open Pin 2 means either "Fan not present" or "Fan Failure". The 5th Pin may be a PWM-Control Signal for the Fan, but it is not necessary to connect it.

 

Pin
Number		 Pin
Name		 Description (may be empty)
1 GND  
2 Status  Fan Present / Fan Failure
3 12 V  
4 Sense  Standard Tachometry Signal
5 ? PWM  possibly PWM-Control Signal, optional

Bridge Pin 1 and 2 to be able to connect normal Fans.

Is this document correct or incorrect?.
There are 1 reports in our database: 1 positive and 0 negative.
PinoutsGuide.com > Motherboard connectors pinouts > Pinout of HP Compaq ProLiant ML310 G1 Case Fan
This page contain parts under Copyright © 2000-2011 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.