Bookmark /  Discuss  /  Edit  this page or submit new.
x pins UNKNOWN connector layout
x pins UNKNOWN connector
at the Mainboard
Proprietary 4 pin CPU Fan connector

This is the CPU Fan Pinout for the Proliant ML310 Generation 1, may be compatible to other Proliant Servers and ML310 Generations.

Uses non-standard 4-Pin-Fan-Connector Wiring, possibly to lock out cheap 3rd party fans.

The only special line is the Status-Line. For normal operation, it is tied to Pin 1 (GND). An Open Pin 2 means either Fan not present or Fan Failure.

 

Pin
Number		 Pin
Name		 Description 
1 GND  
2 Status  Fan Present / Fan Failure
3 Sense  Standard Tachometry Signal
4 12 V  

Bridge Pin 1 and 2 to be able to connect normal Fans. Please bear in mind that in this connector Sense comes before 12V, not the other way around as in normal Fan connectors, so if you force a 3-pin Fan on this connector after bridging 1&2 at the Mainboard, swap Sense and 12V first!

In order to bypass the fan moniter on a Proliant ML330 G3 which has this exact same pin out.   connect pin 1 to pin 2 then place a 27 Ohm resisister between pins 2 and 3.  The server will see a CPU fan in perfect health.

Is this document correct or incorrect?.
There are 1 reports in our database: 1 positive and 0 negative.
PinoutsGuide.com > Motherboard connectors pinouts > Pinout of HP Compaq ProLiant ML310 G1 CPU Fan
This page contain parts under Copyright © 2000-2011 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.