Bookmark /  Discuss  /  Edit  this page or submit new.
16 pin J1962 OBD-2 car proprietary connector layout
16 pin J1962 OBD-2 car proprietary connector
at the KIA car
obd-2 used in most KIA models after 1996's

 

Pin Signal Description
1   IGN control
2 BUS(+) SCP  
4 CGND Chassis ground
5 SGND Signal ground
6 CAN High J-2284
7 K-LINE (ISO 9141-2 and ISO/DIS 14230-4)
8 K-Line ABS diagnostic
10 BUS(-)SCP  
13 FEPS Flash EEPROM
14 CAN Low J-2284
16 +12v Battery power

 

 

 ISO 9141 protocol mostly used, except Kia Optima, Kia Sorento (KWP 2000)

Here are some schemes of OBD-II diagnostic cables

Is this document correct or incorrect?.
There are 0 reports in our database: 0 positive and 0 negative.
PinoutsGuide.com > Cars and bikes interfaces > Pinout of Kia OBD II diagnostic connector
This page contain parts under Copyright © 2000-2011 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to PinoutsGuide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.